| ADAPTERS |
|
| CBW-20020 |
3003 to Husqvarna 562xp S1 (12.10 mm) TO H1 (9.00 mm), 38 mm Centre to Centre Studs
|
| CBW-20030 |
3003 to large Husqvarna S1 (12.10 mm) TO H1 (9.00 mm), 44 mm Centre to Centre Studs
|
| CBW-20035 |
large Husqvarna DBL Milling Only G1 (14.00 mm) TO H1 (9.00 mm) 44 mm Centre to Centre Studs
|
| CBW-20040 |
3003 to Echo CS-450/490/500/530/550 S1 (12.10 mm) TO C1 (8.00 mm), 36 mm Centre to Centre Studs
|
| CBW-20050 |
3003 to most Echo 8mm studs S1 (12.10 mm) TO P4 (8.00 mm), 40 mm Centre to Centre Studs
|
| CBW-20055 |
8mm Echo DBL milling only G1 (14.00 mm) TO P4 (8.00 mm), 40 mm Centre to Centre Studs
|
| CBW-20060 |
3003 to Dolmar/Makita S1 (12.10 mm) TO H1 (9.00 mm), 30 mm Centre to Centre Studs
|
| CBW-20080 |
3003 Stihl DBL Milling Only G1 (14.00 mm) TO S1 (12.10 mm), 35 mm Centre to Centre Studs
|
| CBW-20090 |
3003 to Husqvarna 3120xp not milling S1 (12.10 mm) TO H1 (9.00 mm), 46 mm Centre to Centre Studs
|
| CBW-20095 |
3120xp DBL Milling Only G1 (14.00 mm) TO H1 (9.00 mm), 46 mm Centre to Centre Studs
|
| CBW-30000 |
CANNON OUTSIDE BAR MOUNT PAD, for C1 Mount Bars Used on Small Saws with 8.2mm Studs
|
| CBW-87575 |
spring bushing 3002 to large husky for milling S2 TO H1, 14.0mm to 9.0mm
|
| CBW-87577 |
spring bushing 3002 to 3003 for milling S2 TO S1, 14.0mm to 12.1mm
|
